Colseal surface repair
Colseal is a specially designed bituminous binder sealer used to rejuvenate and re-seal old and worn macadam driveways, restoring its appearance and extending the life of the surface.
Details
Colseal
Colseal is cold applied pre-mixed slurry seal for sealing utility reinstatement and patch repairs. It is also ideal for sealing pre-surface dressing patches. It can also be used for covering score marks and for the treatment of driveways
and pathways.
- Carriageways
- Footways
- Driveways
The surface should be clean, dry and free of any loose chippings/debris (the treatment and removal of any weeds and moss should be carried out prior to laying preparation). Use masking tape to protect any kerbs/ ironwork etc. from being covered (this is to be removed while the Colseal is still wet).
- Mix thoroughly before use using a drill paddle.
- Pour onto surface in manageable amounts and using a soft brush with handle
or squeegee, spread evenly over the
surface to the recommended thickness of approximately 1.5-2mm, promptly finishing this area in the same directional brush stroke. - If a thickness greater than 1.5-2mm is required we recommend an additional application but it must beensured that the first application is set fully before reapplying.
- The material should be applied on a dry day at temperatures of 10°C and rising with no possibility of rainfall.
- Setting times vary with temperature. At the recommended thickness setting times will be, at 25°C approximately 1-3 hours and at 10°C 3-6 hours.
1 x 25kg bag will cover approximately 10 – 14m2 @ 1.5 – 2mm thickness, depending on surface texture.
Colseal is supplied in 25kg buckets (36 x 25kg per pallet) or cardboard boxes containing 40 x 25kg bags.
Store in a cool, dry place, protect from frost.
Manufactured to an ISO 9001:2015 Quality Production System & ISO 14001:2015 Environmental Management System.
For full safety information, please request the Colseal Safety Data Sheet using the contact page.
