CTAL is a Cationic Emulsifier designed for slow setting bitumen emulsions and cold mix applications.
Datasheet
Surface Dressing
CDAL is a Cationic Emulsifier designed for medium setting bitumen emulsions and cold mix applications.
DatasheetX2TDC(R) is a mix of fatty imidazoline derivates and amidoamines diluted in inert solvents. X2TDC(R) can be used with Paraphinic bitmumen, and also SBS modified bitumen.
DatasheetTNB, is a mix of fatty imidazoline derivates and amidoamines designed for fast-breaking emulsions with intermediate viscosity, can be used with both naphtenic and parrafinic bitumen.
DatasheetTDC(R) is a fatty amidoamine designed for use in fast-breaking emulsion with low viscosity with both polymer bitumen and hard bitumen.
DatasheetTCMC is a blend of fatty imidazolines and amidoamines designed for the manufacture of low-viscosity, fast-breaking emulsions using a wide range of bitumens including naphtenic bitumens.
DatasheetCDML is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDML can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
DatasheetCDM is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDM can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
DatasheetCHT is an aqueous solution of diazotized amphoteric ingredients used in the inversion of natural latex for cationic emulsions.
DatasheetCold Mix Asphalts
CDAL is a Cationic Emulsifier designed for medium setting bitumen emulsions and cold mix applications.
DatasheetMDC is a special blend of fatty nitrogen compounds designed for emulsions used in cold mixes like microsurfacing and grave emulsion.
DatasheetGAP is a special blend of fatty nitrogen compounds in an inert solvent. GAP is used in the manufacture of mixing grade bitumen emulsions for cold mixes, grave emulsion and micro-surfacing.
DatasheetCQA-1 is a quaternary amonuim salt designed for use as cationic emulsifier for slow setting and slurry seal emulsions and as retardant for micro-surfacing.
DatasheetCTAL is a Cationic Emulsifier designed for slow setting bitumen emulsions and cold mix applications.
DatasheetCTA is a fatty polyamine solid cationic emulsifier designed for slow setting bitumen emulsions, used in grave emulsions, cold micro asphalt and cold mix applications.
DatasheetAFM is an amphoteric emulsifier used in the manufacture of bitumen emulsions with a neutral pH, but could be also anionic or cationic. This amphoteric emulsifier can be used to manufacture emulsions used for microsurfacing, tack-coating, prime-coating and in cold mixes such as grave emulsion, and emulsions for soil stabilisation.
DatasheetAdhesion Agents
XTX (R) is a mix of fatty imidazoline / amidoamine derivatives and polyethylene amines designed for use as a "short-term only" adhesive agent for hot binders to ensure a better bitumen/aggregate bond.
DatasheetTPH is a concentrated mix of alkyl-amidoamines and polyethylene amines used as an adhesive agent for hot binders to ensure a better bitumen/aggregate bond.
DatasheetLatex Inverter
CHT is an aqueous solution of diazotized amphoteric ingredients used in the inversion of natural latex for cationic emulsions.
DatasheetBitumen Additives
CDML is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDML can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
DatasheetCDM is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDM can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
DatasheetTack Coat with Hard Bitumens
CDA is a Cationic Emulsifier for medium setting bitumen emulsions and cold mix applications.
DatasheetTDC(R) is a fatty amidoamine designed for use in fast-breaking emulsion with low viscosity with both polymer bitumen and hard bitumen.
DatasheetAnti Stick Agent
CDAL is a Cationic Emulsifier designed for medium setting bitumen emulsions and cold mix applications.
DatasheetX2TDC(R) is a mix of fatty imidazoline derivates and amidoamines diluted in inert solvents. X2TDC(R) can be used with Paraphinic bitmumen, and also SBS modified bitumen.
DatasheetTNB, is a mix of fatty imidazoline derivates and amidoamines designed for fast-breaking emulsions with intermediate viscosity, can be used with both naphtenic and parrafinic bitumen.
DatasheetTDC(R) is a fatty amidoamine designed for use in fast-breaking emulsion with low viscosity with both polymer bitumen and hard bitumen.
DatasheetTCMC is a blend of fatty imidazolines and amidoamines designed for the manufacture of low-viscosity, fast-breaking emulsions using a wide range of bitumens including naphtenic bitumens.
DatasheetCDML is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDML can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
DatasheetCDM is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDM can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
DatasheetCHT is an aqueous solution of diazotized amphoteric ingredients used in the inversion of natural latex for cationic emulsions.
DatasheetWarm Mix Additive
CWM BG1 is a mixture of surface active agents used as an additive for bitumen. Hot Mixes manufactured with bitumen containing CWM BG1 are known as Warm Mixes as they can be manufactured at lower than normal temperatures and laid at temperatures as low as 120°C.
DatasheetCWM is a mixture of surface active agents used as an additive for bitumen. Hot Mixes manufactured with bitumen containing CWM are known as Warm Mixes as they can be manufactured at lower than normal temperatures and laid at temperatures as low as 120°C.
DatasheetMicrosurfacing
Designed for bitumen emulsions TT is used in cold micro asphalt, with paraffinic or naphthenic bitumen and hydrochloric acid. It can be used with or without bitumen additive CDM, and with or without CQA-1 as a dope.
DatasheetTLC is a mix of fatty imidazoline derivatives and amidoamines designed for emulsions used in cold micro asphalt.
DatasheetCPM-P is a mix of fatty imidazoline derivatives and amidoamines designed for emulsions used in cold micro asphalt, with parrafinic bitumen and phosphoric acid.
DatasheetASC is a highly effective anti-stick release agent for use when working with bituminous mixtures. It prevents bituminous mixtures from sticking to the beds of delivery trucks, paver hoppers, roller drums, the sleighs of micro-surfacing trucks and hand tools such as shovels, rakes, buckets, etc. ASC replaces the use of diesel or other hazardous hydrocarbon fluids for the cleaning of equipment and tools.
DatasheetMDC is a special blend of fatty nitrogen compounds designed for emulsions used in cold mixes like microsurfacing and grave emulsion.
DatasheetGAP is a special blend of fatty nitrogen compounds in an inert solvent. GAP is used in the manufacture of mixing grade bitumen emulsions for cold mixes, grave emulsion and micro-surfacing.
DatasheetCQA-1 is a quaternary amonuim salt designed for use as cationic emulsifier for slow setting and slurry seal emulsions and as retardant for micro-surfacing.
DatasheetCTA is a fatty polyamine solid cationic emulsifier designed for slow setting bitumen emulsions, used in grave emulsions, cold micro asphalt and cold mix applications.
DatasheetCDML is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDML can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
DatasheetCDM is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDM can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
Datasheet