CDAL is a Cationic Emulsifier designed for medium setting bitumen emulsions and cold mix applications.

X2TDC(R) is a mix of fatty imidazoline derivates and amidoamines diluted in inert solvents. X2TDC(R) can be used with Paraphinic bitmumen, and also SBS modified bitumen.

TNB, is a mix of fatty imidazoline derivates and amidoamines designed for fast-breaking emulsions with intermediate viscosity, can be used with both naphtenic and parrafinic bitumen.

TDC(R) is a fatty amidoamine designed for use in fast-breaking emulsion with low viscosity with both polymer bitumen and hard bitumen.

TCMC is a blend of fatty imidazolines and amidoamines designed for the manufacture of low-viscosity, fast-breaking emulsions using a wide range of bitumens including naphtenic bitumens.

CDML is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDML can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.

CDM is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDM can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.

CHT is an aqueous solution of diazotized amphoteric ingredients used in the inversion of natural latex for cationic emulsions.

CDAL is a Cationic Emulsifier designed for medium setting bitumen emulsions and cold mix applications.

MDC is a special blend of fatty nitrogen compounds designed for emulsions used in cold mixes like microsurfacing and grave emulsion.

GAP is a special blend of fatty nitrogen compounds in an inert solvent. GAP is used in the manufacture of mixing grade bitumen emulsions for cold mixes, grave emulsion and micro-surfacing.

CQA-1 is a quaternary amonuim salt designed for use as cationic emulsifier for slow setting and slurry seal emulsions and as retardant for micro-surfacing.

CTAL is a Cationic Emulsifier designed for slow setting bitumen emulsions and cold mix applications.

CTA is a fatty polyamine solid cationic emulsifier designed for slow setting bitumen emulsions, used in grave emulsions, cold micro asphalt and cold mix applications.

AFM is an amphoteric emulsifier used in the manufacture of bitumen emulsions with a neutral pH, but could be also anionic or cationic. This amphoteric emulsifier can be used to manufacture emulsions used for microsurfacing, tack-coating, prime-coating and in cold mixes such as grave emulsion, and emulsions for soil stabilisation.

XTX (R) is a mix of fatty imidazoline / amidoamine derivatives and polyethylene amines designed for use as a "short-term only" adhesive agent for hot binders to ensure a better bitumen/aggregate bond.

TPH is a concentrated mix of alkyl-amidoamines and polyethylene amines used as an adhesive agent for hot binders to ensure a better bitumen/aggregate bond.

CHT is an aqueous solution of diazotized amphoteric ingredients used in the inversion of natural latex for cationic emulsions.

CDML is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDML can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.

CDM is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDM can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.

CDA is a Cationic Emulsifier for medium setting bitumen emulsions and cold mix applications.

TDC(R) is a fatty amidoamine designed for use in fast-breaking emulsion with low viscosity with both polymer bitumen and hard bitumen.

CDAL is a Cationic Emulsifier designed for medium setting bitumen emulsions and cold mix applications.

X2TDC(R) is a mix of fatty imidazoline derivates and amidoamines diluted in inert solvents. X2TDC(R) can be used with Paraphinic bitmumen, and also SBS modified bitumen.

TNB, is a mix of fatty imidazoline derivates and amidoamines designed for fast-breaking emulsions with intermediate viscosity, can be used with both naphtenic and parrafinic bitumen.

TDC(R) is a fatty amidoamine designed for use in fast-breaking emulsion with low viscosity with both polymer bitumen and hard bitumen.

TCMC is a blend of fatty imidazolines and amidoamines designed for the manufacture of low-viscosity, fast-breaking emulsions using a wide range of bitumens including naphtenic bitumens.

CDML is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDML can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.

CDM is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDM can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.

CHT is an aqueous solution of diazotized amphoteric ingredients used in the inversion of natural latex for cationic emulsions.

CWM BG1 is a mixture of surface active agents used as an additive for bitumen. Hot Mixes manufactured with bitumen containing CWM BG1 are known as Warm Mixes as they can be manufactured at lower than normal temperatures and laid at temperatures as low as 120°C.

CWM is a mixture of surface active agents used as an additive for bitumen. Hot Mixes manufactured with bitumen containing CWM are known as Warm Mixes as they can be manufactured at lower than normal temperatures and laid at temperatures as low as 120°C.

Designed for bitumen emulsions TT is used in cold micro asphalt, with paraffinic or naphthenic bitumen and hydrochloric acid. It can be used with or without bitumen additive CDM, and with or without CQA-1 as a dope.

TLC is a mix of fatty imidazoline derivatives and amidoamines designed for emulsions used in cold micro asphalt.

CPM-P is a mix of fatty imidazoline derivatives and amidoamines designed for emulsions used in cold micro asphalt, with parrafinic bitumen and phosphoric acid.

ASC is a highly effective anti-stick release agent for use when working with bituminous mixtures. It prevents bituminous mixtures from sticking to the beds of delivery trucks, paver hoppers, roller drums, the sleighs of micro-surfacing trucks and hand tools such as shovels, rakes, buckets, etc. ASC replaces the use of diesel or other hazardous hydrocarbon fluids for the cleaning of equipment and tools.

MDC is a special blend of fatty nitrogen compounds designed for emulsions used in cold mixes like microsurfacing and grave emulsion.

GAP is a special blend of fatty nitrogen compounds in an inert solvent. GAP is used in the manufacture of mixing grade bitumen emulsions for cold mixes, grave emulsion and micro-surfacing.

CQA-1 is a quaternary amonuim salt designed for use as cationic emulsifier for slow setting and slurry seal emulsions and as retardant for micro-surfacing.

CTA is a fatty polyamine solid cationic emulsifier designed for slow setting bitumen emulsions, used in grave emulsions, cold micro asphalt and cold mix applications.

CDML is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDML can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.

CDM is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDM can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.