Colseal is a pre-mixed slurry seal for sealing utility reinstatement and patch repairs. It is also ideal for sealing pre-surface dressing patches. It can also be used for covering score marks and for the treatment of driveways and pathways.
The surface should be clean, dry and free of any loosechippings/debris (the treatment and removal of any weeds andmoss should be carried out prior to laying preparation). Use masking tape to protect any kerbs/ironwork etc. from beingcovered (this is to be removed when the surface is completelydry, after the whole application is complete).
- Mix thoroughly before use using a drill paddle.
- Pour onto surface in manageable amounts and using a softbrush with handle or squeegee, spread evenly over thesurface to the recommended thickness of approximately 1.5mm-2mm, promptly finishing this area in the samedirectional brush stroke.
- If a thickness greater than 1.5mm-2mm is required werecommend an additional application but it must be ensuredthat the first application is set fully before reapplying. The material should be applied on a dry day at temperatures of 10°C and rising with no possibility of rainfall. Setting times varywith temperature. At the recommended thickness setting timeswill be, at 25°C approximately 1-3 hours and at 10°C 3-6 hours.
1 x 25kg bag will cover approximately 10-14m2 @ 1.5mm-2mm thickness, depending on surface texture.
Colseal is supplied in 25kg buckets (36 x 25kg per pallet) orcardboard boxes containing 40 x 25kg bags.
Store in a cool, dry place, protect from frost.
Supplied in accordance to ISO9001.
For full safety information, please request the Colseal SafetyData Sheet using the contact information below.