Chemoran Products

Surface Dressing

CHT
Used in the inversion of natural latex for cationic emulsions.
CHT is an aqueous solution of diazotized amphoteric ingredients used in the inversion of natural latex for cationic emulsions.
Download Datasheet
CDM
A bitumen additive used to improve cohesion in emulsions made using paraffinic bitumen.
CDM is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDM can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
Download Datasheet
CDML
A bitumen additive used to improve cohesion in emulsions made using paraffinic bitumen.
CDML is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDML can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
Download Datasheet
TCMC
Designed for use in low-viscosity, fast-breaking emulsions
TCMC is a blend of fatty imidazolines and amidoamines designed for the manufacture of low-viscosity, fast-breaking emulsions using a wide range of bitumens including naphtenic bitumens.
Download Datasheet
TDC(R)
Designed for use in fast-breaking emulsion with low viscosity.
TDC(R) is a fatty amidoamine designed for use in fast-breaking emulsion with low viscosity with both polymer bitumen and hard bitumen.
Download Datasheet
TNB
Fast breaking emulsifier for use with both naphthenic and paraffinic bitumen.
TNB, is a mix of fatty imidazoline derivates and amidoamines designed for fast-breaking emulsions with intermediate viscosity, can be used with both naphtenic and parrafinic bitumen.
Download Datasheet
X2TDC(R)
Designed for use in fast breaking emulsions with high viscosity.
X2TDC(R) is a mix of fatty imidazoline derivates and amidoamines diluted in inert solvents. X2TDC(R) can be used with Paraphinic bitmumen, and also SBS modified bitumen.
Download Datasheet

Grave Emulsion and cold in place recycling

AFM
Designed for bitumen emulsions with a Neutral pH.
AFM is an amphoteric emulsifier used in the manufacture of bitumen emulsions with a neutral pH, but could be also anionic or cationic. This amphoteric emulsifier can be used to manufacture emulsions used for microsurfacing, tack-coating, prime-coating and in cold mixes such as grave emulsion, and emulsions for soil stabilisation.
Download Datasheet
CTA
A fatty polyamine solid cationic emulsifier.
CTA is a fatty polyamine solid cationic emulsifier designed for slow setting bitumen emulsions, used in grave emulsions, cold micro asphalt and cold mix applications.
Download Datasheet
CTAL
CTAL is a Cationic Emulsifier designed for slow setting bitumen emulsions and cold mix applications.
Download Datasheet
CQA-1
Cationic emulsifier for slow setting and slurry seal emulsions and as a retardant for micro-surfacing.
CQA-1 is a quaternary amonuim salt designed for use as cationic emulsifier for slow setting and slurry seal emulsions and as retardant for micro-surfacing.
Download Datasheet
GAP
Cationic Emulsifier for grave emulsion, micro-surfacing and cold mix applications.
GAP is a special blend of fatty nitrogen compounds in an inert solvent. GAP is used in the manufacture of mixing grade bitumen emulsions for cold mixes, grave emulsion and micro-surfacing
Download Datasheet
MDC
Designed for emulsions used in cold mixes
MDC is a special blend of fatty nitrogen compounds designed for emulsions used in cold mixes like microsurfacing and grave emulsion.
Download Datasheet
TEX08B
More info on TEXO8B coming soon.

Download Datasheet

Dense Cold Mix

CDA
Cationic Emulsifier for medium setting and cold mix applications.
CDA is a Cationic Emulsifier for medium setting bitumen emulsions and cold mix applications.
Download Datasheet
CDAL
Cationic Emulsifier
CDAL is a Cationic Emulsifier designed for medium setting bitumen emulsions and cold mix applications.
Download Datasheet

Adhesion Agents

TPH
Additive for long term adhesion in hot binders.
TPH is a concentrated mix of alkyl-amidoamines and polyethylene amines used as an adhesive agent for hot binders to ensure a better bitumen/aggregate bond.
Download Datasheet
XTX(R)
Additive for short term adhesion in hot binders.
XTX (R) is a mix of fatty imidazoline / amidoamine derivatives and polyethylene amines designed for use as a "short-term only" adhesive agent for hot binders to ensure a better bitumen/aggregate bond.
Download Datasheet

Tack Coat with hard bitumens

CDA
Cationic Emulsifier for medium setting emulsions and cold mix applications
CDA is a Cationic Emulsifier for medium setting bitumen emulsions and cold mix applications.
Download Datasheet
TDC(R)
Designed for use in fast-breaking emulsion with low viscosity.
TDC(R) is a fatty amidoamine designed for use in fast-breaking emulsion with low viscosity with both polymer bitumen and hard bitumen.
Download Datasheet

Micro-Surfacing

AFM
Designed for bitumen emulsions with a Neutral pH.
AFM is an amphoteric emulsifier used in the manufacture of bitumen emulsions with a neutral pH, but could be also anionic or cationic. This amphoteric emulsifier can be used to manufacture emulsions used for micro-surfacing, tack-coating, prime-coating and in cold mixes such as grave emulsion, and emulsions for soil stabilisation.
Download Datasheet
ASC
Anti-stick release agent for bituminous mixtures
ASC is a highly effective anti-stick release agent for use when working with bituminous mixtures. It prevents bituminous mixtures from sticking to the beds of delivery trucks, paver hoppers, roller drums, the sleighs of micro-surfacing trucks and hand tools such as shovels, rakes, buckets, etc. ASC replaces the use of diesel or other hazardous hydrocarbon fluids for the cleaning of equipment and tools.
Download Datasheet
CDM
A bitumen additive used to improve cohesion in emulsions made using paraffinic bitumen.
CDM is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDM can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
Download Datasheet
CDML
A bitumen additive used to improve cohesion in emulsions made using paraffinic bitumen.
CDML is a bitumen additive. It improves the cohesion build-up of micro-surfacing made with paraffinic bitumen. CDML can also be used for rapid setting emulsions to increase their viscosity and speed-up the cohesion build-up of the emulsion for surface dressing application.
Download Datasheet
CHT
Used in the inversion of natural latex for cationic emulsions.
CHT is an aqueous solution of azotized amphoteric ingredients used in the inversion of natural latex for cationic emulsions.
Download Datasheet
CTA
Cationic Emulsifier for slow setting emulsions and cold mix applications
CTA is a fatty polyamine solid cationic emulsifier designed for slow setting bitumen emulsions, used in grave emulsions, cold micro asphalt and cold mix applications.
Download Datasheet
CPM-P
Designed for use in micro-surfacing emulsions with paraffinic bitumen and Phosphoric acid
CPM-P is a mix of fatty imidazoline derivatives and amidoamines designed for emulsions used in cold micro asphalt, with parrafinic bitumen and phosphoric acid.
Download Datasheet
CQA-1
Cationic emulsifier for slow setting and slurry seal emulsions.
CQA-1 is a quaternary amonuim salt designed for use as cationic emulsifier for slow setting and slurry seal emulsions and as retardant for micro surfacing.
Download Datasheet
GAP
Used in the manufacture of emulsions for cold mixes.
GAP is a special blend of fatty nitrogen compounds in an inert solvent. GAP is used in the manufacture of mixing grade bitumen emulsions for cold mixes, grave emulsion and microsurfacing
Download Datasheet
MDC
Cationic Emulsifier for grave emulsion, micro-surfacing and cold mix applications.
MDC is a special blend of fatty nitrogen compounds designed for emulsions used in cold mixes like microsurfacing and grave emulsion.
Download Datasheet
TLC
Designed for use in micro-surfacing and grave emulsions.
TLC is a mix of fatty imidazoline derivatives and amidoamines designed for emulsions used in cold micro asphalt.
Download Datasheet
TT
Cationic emulsifier for use in micro-surfacing.
Designed for bitumen emulsions TT is used in cold micro asphalt, with paraffinic or naphthenic bitumen and hydrochloric acid. It can be used with or without bitumen additive CDM, and with or without CQA-1 as a dope.
Download Datasheet

Anti-Stick Agent

ASC
Anti-stick release agent for bituminous mixtures
ASC is a highly effective anti-stick release agent for use when working with bituminous mixtures. It prevents bituminous mixtures from sticking to the beds of delivery trucks, paver hoppers, roller drums, the sleighs of micro-surfacing trucks and to hand tools such as shovels, rakes, buckets, etc. ASC replaces the use of diesel or other hazardous hydrocarbon fluids for the cleaning of equipment and tools.
Download Datasheet

Warm Mix Addittive

CWM
Chemoran Warm Mix Additive
CWM is a mixture of surface active agents used as an additive for bitumen. Hot Mixes manufactured with bitumen containing CWM are known as Warm Mixes as they can be manufactured at lower than normal temperatures and laid at temperatures as low as 120°C.
Download Datasheet
CWM-BG1
Chemoran Warm Mix Additive
CWM BG1 is a mixture of surface active agents used as an additive for bitumen. Hot Mixes manufactured with bitumen containing CWM BG1 are known as Warm Mixes as they can be manufactured at lower than normal temperatures and laid at temperatures as low as 120°C.
Download Datasheet